18
default code 123456. When the LCD screen shows “Select Menu”, Press “▲” or “▼” to select
“Set/Change User Code” ,Enter the 6-digits new code .
Note:
Follow the same steps to change any valid code.
29. Enroll the second or additional codes (Level 1 )
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again. Enter the first enrolled code (ID No.1). After the code is verified
successfully, press “▲” or “▼” to select “Enroll New User” , Press “▲” or “▼” to select ID
No. ,and set new codes .
30. Disable / Enable User (Level 1 & 2)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲”
or “▼” to select “System Menu”. Press “Menu/OK” again. Place the administrator’s finger on
the reader window or enter an administrator’s code. After the fingerprint or code is verified
successfully. Follow the steps on Page 9 to disable or enable a user.
31. Set time delay (Level 1 & 2)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again. Place an administrator’s finger on the reader window or
enter an administrator’s code. After the fingerprint or code is verified successfully. Follow the
steps on Pages 10 to set time delay.
32.Unlock with an enrolled code (Level 1 & 2)
Place an enrolled finger on the reader window or enter an enrolled code. Refer to example on
Page 11.
33.Set number of locks (Level 1 & 2)
Press “Menu/OK”. The screen will show “Select Menu”. Press
“▲” or “▼” to select “System Menu”. Press “Menu/OK” again. Place the administrator’s finger
on the reader window or enter an administrator’s code. After the fingerprint or code is verified
successfully, press “▲” or “▼” to select “Set number of locks” and follow the steps on Page
12.
34.Authorize access to locks (Level 1 & 2)
Follow the steps on page 13.
35.Enable Sequence (Level 1 & 2)
Follow the steps on page 14.
36.Delete one user / all users (Level 1 & 2)
Follow the steps on page 15.
37.Dual Mode (Level 1 & 2)
