
9
4
3
2
¾
in.
(70 mm)
7/32 in.
(5.5 mm)
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Be sure to drill into the center of the studs.
IMPORTANT
: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm).
4. Install wall plate
10
using four lag bolts
11
and four washers
12
. Tighten the lag bolts only until they are pulled firmly against the wall
plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
CAUTION:
Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent unwanted movement of
the wall plate
10
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
10
11
12
Содержание QLL23
