Seculux MANAGER DCS, Руководство пользователя

Страница: 7 / 66

Introduction
7
1.3 Descriptive diagram of the Proximity Key Interface
The proximity system allows the transmission of data between the Manager
Interface and the proximity key to take place with no physical contact: simply place
the key some 4 cm. from the Interface zone indicated with a serigraph.
Each proximity key has a personal code, which can be reprogrammed by using a
Portable Programmer MANAGER DCS. The key is highly attractive, very small and
can be carried as a key ring. In addition, it is very inexpensive to maintain and does
not use batteries.
1.3.1 Technical characteristics
General Data
Reading system By proximity
Working distance 4 cm.
Housing Plastic
Technical Data
Power supply Via the Portable Programmer MANAGER DCS(*)
Idle/working consumption 12 / 53 mA
Oscillation frequency 125 Khz
Working temperature range -20 ºC to + 55 ºC
(*) Owing to the Interface’s high consumption, we recommend that if extensive work
is needed with it, connect the MANAGER DCS to the mains supply so as to avoid
shortening battery life.
1.3.2 Diagram connection
Insert one end of the special connection cable in the connection slot of the MANAGER’s
Proximity Key Interface, and the other in the connection for transmitters of the Portable
Programmer MANAGER DCS (see figure page 6, no. 8 of the MANAGER’s manual).