Seculux MANAGER DCS, Руководство пользователя

Страница: 55 / 66

General functions
55
Access is made by means of SmartCard Menu/Substitute.
Once selected, press and the message type code will
appear on the screen
.
Press . Enter the number of the replacement to be
made.
Press once more. Insert the card you wish to include.
Then the following screens will
appear
5.11 Key Replacement Menu
This function allows a proximity key that has been lost or stolen to be annulled and
the same code to be used without any need to go to the installation to annul the
lost code in the receiver. That is, a “replacement” is made with a new proximity key,
modifying the code and the “Replacement Number”. This “Replacement Number”
goes from “0” to “3”, so the original key may only have three replacements. A
higher replacement, on issuing the code to the receiver, annuls the previous one
and is automatically updated.
Access is made by Prox. Key Menu/Substitute.
Once selected, press and the message type code will
appear on the screen
.
Press . Enter the number of the replacement to be
made.
Press again. Now the channel is requested. Enter the
channel number and validate by pressing the key
..
Then the Portable programmer will ask you to approach the
key to the Interface. Remember to approach it to the
serigraphed areas and at a distance of less than 4 cm.
Once the Interface has saved correctly, a short beep will be
emitted to indicate the validity of the storing operation. The
following message will appear on screen
The operation will then be confirmed on screen
5.12 Direct functions for reading or storing a transmitter,
smartcard or proximity key (*)
These functions make it possible to read or store a transmitter, smartcard or
proximity key quickly and without having to enter any menu.