Seculux MANAGER DCS, Руководство пользователя

Страница: 18 / 66

MANAGER DCS 2.0X I
18
2.8 Storing “n” smartcards
Retrieve the installation as indicated in section 2.1 of this chapter.
From the menu:
Press . The installation will appear on the screen:
Using the or keys, enter the position from which you wish to read the
smartcards.
Press the and keys simultaneously. The screen
will show:
Press and a message will ask for the number of
smartcards you wish to save. Enter the quantity using the
numerical keys. Press
.
The following message will appear:
Insert the card into the smartcard connector (see figure on page 6, no. 10).
The confirmation of the operation will appear on the screen.
Press
for the programme to request the introduction of
another smartcard.
Once all of the smartcards have been entered, the screen will show the position of
each card, the code, the replacement number, the status and the channel.
Press to return to the menu:
Remember to store the installation again in the memory card and in the
memory cartridge in order to make the changes effective.