Secube AT-A1600, Руководство пользователя

Страница: 76 / 109

76
MOTION SETUP
You can turn on or off motion events for each camera by toggling On and Off at box below EVENT+. Your
DVR has 5 levels of sensitivity for motion and you can assign the sensitivity level by pressing the box below
SENSE+. The motion detection area can be set by pressing the box below AREA+. The following motion
detection area setup screen will appear.
Figure – MOTION DETECTION AREA.
When getting into the motion detection area screen, a Blue dot pointer will be displayed on the grid at the
very top-left part. If pressing the enter, the dot will turn to Red color and it will arrow to select grids and set
up the motion area by pressing Up, Down, Left and Right cursor buttons on the front panel or remote.
NOTE: When the dot color is Blue, you can move that pointer by pressing the arrow buttons
without selecting the grids.
NOTE: When the dot color is Red, you can select the grids or erase the selected grids by pressing
the arrow buttons.
When pressing MENU button on the front panel or remote in the Motion Detection Area, the below pop-up
menu will be displayed.
You can select all grids by pressing SELECT ALL or clear selected grids by pressing CLEAR ALL. When
pressing Reverse, the selected grids will be cleared and unselected grids will be selected.
You can save the selected area, close the above pop-up menu or exit from the Motion Detection Area
Setup Menu from the above pop-up menu.
User
’
s Manual