Secube AT-A1600, Руководство пользователя

Страница: 67 / 109

67
PTZ SETUP
Highlight PTZ SETUP in the main menu and press the enter button. The PTZ SETUP screen appears.
Figure – PTZ SETUP(1). Figure – PTZ SETUP(2).
The PTZ SETUP screen displays the camera inputs in groups of four: 1-4, 5-8, 9-12 and 13-16.
You can set up the baud rate, data bit, parity and stop bit by highlighting the boxes below PORT+ and press
the enter button.
You can set up IDs for each channel on the ID heading.
NOTE: The IDs must be matched with PTZ units to control the PTZ units.
Selecting the TYPE+ causes a list of controllable cameras to display. Select your camera from the list and
press the enter button.
You have to connect the camera to the RS485 terminal on the back of the DVR by following the camera
manufacturer’s instructions.
User
’
s Manual