Installation Instructions Cont’d
—
Spectrum – Light Mirrors
Page 4 of 4
Lens Replacement
| To replace either of the lenses, first remove the
four-M4 bolts, followed by the bezel, then carefully remove the lens.
Make sure to clean out any debris from the LED cavity and make
sure that the O-ring is clean and clear of debris as well. To install new
lens, follow the previous steps in reverse. Tighten bolts incrementally
in a diagonal pattern to reduce chance of glass breaking. Torque
spec.: 70 in/lb.
Note: Do not overtighten.
Mirror Replacement
| To replace the convex mirror, first remove
the six-M4 bolts, followed by the bezel, then carefully remove the
convex mirror. Make sure to clean out any debris in the mirror cavity
before replacing the mirror. To install new mirror, follow the previous
steps in reverse. Tighten bolts incrementally in a diagonal pattern to
reduce chance of glass breaking. Torque spec.: 70 in/lb.
Note: Do not overtighten.
Mirror/Glass Care
| Use caution when cleaning mirror/glass; sand, dirt,
and mud are very abrasive. If your mirrors/glass have a high amount
of mud/debris on them, it’s best to spray with water first then wipe
with soft cloth or towel. Do not use strong/harsh cleaning products
which may damage mirror/glass or anodized surfaces.
CAUTION!
|
Lights/Mirrors could be HOT! Use caution if handling shortly after lights have been on for an extended period.
Spectrum Warranty
| If Sector Seven determines, in its sole discretion, that your product is defective in material or workmanship,
Sector Seven will honor your warranty claim. In some cases, the product may be replaced depending on the specific timeframe of the
purchase. If the product is repaired, all parts, labor, and return shipping will be covered.
Warranties cover defects in manufacturing or craftsmanship only. Warranties do not cover, among other things: installation errors, wear
and tear, acts of God, misuse, abuse, neglect, accidents, collisions, defects due to custom specifications provided by you, or any
product modifications, configurations or combinations not performed by us or on our behalf.
•
5-year manufacturer’s warranty on Spectrum housing and clamp. Note: You must be the original owner with proof of
product registration within 30 days after purchase.
•
5-year manufacturer’s warranty on Spectrum LED lights.
•
No warranty on glass and/or anodized coatings.
•
Failure to properly register purchase with Sector Seven may void the warranty.
•
Register product here -
https://promotobillet.com/sectorsevenproducts/support/product-registration
Sector Seven / 11461 Lone Star Road, Nampa, ID, 83651 /
www.SectorSeven.zone
