Emergency keys
In order to call for a help (the premises must be secured by CMS) press at once two specific keys and hold
them pressed down at least 1 second. When emergency alarm occurs, siren starts to sound and alarm
message will be shown on the keypad display.
Ways of disarming
Disarming by PIN code, when entering the premise
After opening the door, which are protected, the system begins to count the entry delay. During this time it is
necessary to enter PIN code. All partitions, which are controlled by user, will be disarmed.
Partial disarming
, [
Disarming
], ... , ,
1
1
1
1
4
GHI
!
4
GHI
!
4
GHI
!
4
GHI
!
ENT
ENT
ENT
ENT
PIN:
PIN:
PIN:
PIN:
01:44
1
0-26
+25°C
Alarm clearing
All events, which are concerned with protected premises and status of the system, are stored in the Event
Log. The events are listed in chronological order, the used can choose to review Alarm Events, Trouble
Events, Control Events or All Events. Event log review:
, [Event Log] , [Alarm Events] ,
;
, [Event Log] , [Trouble Events] ,
.
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
PIN:
PIN:
PIN:
PIN:
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
PIN:
PIN:
PIN:
PIN:
Use , keys for navigation on the log.
Event log review
Fire alarm
–
+
.
Medical alarm –
+
.
Panic alarm
–
+
.
A
A
A
A
1
1
1
1
B
!
BY
B
!
BY
B
!
BY
B
!
BY
4
GHI
!
4
GHI
!
4
GHI
!
4
GHI
!
C
C
C
C
7
PQRS
7
PQRS
7
PQRS
7
PQRS
3
Short user manual
Intruder alarm system
KM2
4, KM24A
keypad
KM2
4, KM24A
keypad
Disarming can be done by two ways:
.
all partitions, which are controlled by user, will be disarmed.
with special key or by
entering PIN code When dis
a
rming is
activated
with the key
,
user has possibility to disarm all or selected partitions. For partial disarming
it's
necessary to
unmark
the partitions, which will be
dis
armed (
un
mark the partitions
by pressing
... keys
or select partitions by pressing
,
keys
and
unmark/mark by pressing , or
keys
). When
dis
arming is
activated by entering PIN code,
1
1
1
1
4
GHI
!
4
GHI
!
4
GHI
!
4
GHI
!
####
Partial disarming is useful when part of partitions should be disarmed. This kind of arming is available in
house with garage. The house partitions are disarmed, the garage partition remains armed.
Disarming
Disarming
Enter PIN
****
Full system
Full system
Press [ENT] to disarm
Press [1]..[4] to select part.
Disarming
Disarming
Garage
3
2 nd Floor
2
1
1st Floor
Partitions
ARMED
ARMED
01:44
1st Floor
2 nd Floor
Garage
1
0-26
+25°C
Press
key
.
For partial disarming press
...
keys
.
1
1
1
1
4
GHI
!
4
GHI
!
4
GHI
!
4
GHI
!
Using ... keys
unmark
all
partitions which have to be
dis
armed.
Press key to confirm the decision.
1
1
1
1
4
GHI
!
4
GHI
!
4
GHI
!
4
GHI
!
ENT
ENT
ENT
ENT
Enter PIN.
Alarm
!!!
Alarm
!!!
D
oor
If an alarm has occured, on the display appears message “Alarm
!!!” with an explanation, what reason
caused it.
Key backlight starts to blink red
, the siren starts to sound and report about alarm is sending to
CMS or to the user.
There are 2 ways to clear alarm and turn off key:
ü
1 way – by pressing the key and entering the PIN code:
.
After the alarm clearing action is performed the siren stops sound
”
ü
2 way
– by entering the PIN code.
After the alarm clearing action is performed the siren stops to sound,
, the system will be disarmed
if it was armed
before entering PIN code. When all partitions, which are
controlled by User, are disarmed,
it's not recommended
to use PIN for alarm clearing, because is possible
casual arming.
,the key backlight binking red goes off,
the system status remains the same as was before alarm. If the system has smoke detector and alarm was
caused by smoke, which was raised by domestic reasons, the system will start alarm, nevertheless it was
armed or disarmed. The only way to clear alarm is possible by bypassing of smoke detector (see
2
page,
“Bypassing zone ).
the key backlight binking red goes
off
CLR
CLR
CLR
CLR
CLR
CLR
CLR
CLR
CLR
CLR
CLR
CLR
PIN:
PIN:
PIN:
PIN:
CLR
CLR
CLR
CLR
CLR
CLR
CLR
CLR
