- 3 -
○
When transferring the air pump. Carry the body by both hands.
●
Do not carry the air pump by holding the filter cover, as
the body slipped of the filter cover may drop on your
foot.
●
Do not carry the air pump by holding the power cord,
which will cut the wires in it. It may cause heat or
ignition. Wear gloves not to be burnt. The body is
heated during operation.
2.Instructions
2-1 Prior to Operation
○
This air pump is not designed to be mounted on the vehicle.
So, do not install it on the vehicle.
○
In applications where the stop of air supply can never
be allowed , such as fish raising, a spare air pump should
be provided.
●
Make sure to operate the spare air pump every other month to confirm its proper
operation.
2-2 Storage and Transfer
○
Do not store the air pump in a place where the
ambient temperature is below -10
℃
. The magnet
inside the pump is weakened, and as the result, the
equipment will not perform as intended.
○
This air pump is designed only for air feeding.
●
Since the fluid flowed in runs through the charged part,
inflow of any flammable gas or liquid could cause ignition,
electric shock or short-circuit.
○
This air pump is designed only for the voltage of 220-240V ( 50Hz).
●
Using undesignated power supply cord could cause electric shock or short
circuit.
○
Do not transform the pump.
○
Nonprofessionals do not disassemble or repair the
pump.
