Seco SBC-C90, Руководство пользователя

Страница: 51 / 63

SBC-C90
SBC-C90 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
51
-
RAM Temperature
-
APU_VDDCPU_RUN
-
APU_VDDNB_RUN
-
MEM_VDDIO_SUS
-
VDDP_ALW
-
MEM_VPP_SUS
-
1.8V_ALW
-
MEM_VTT_RUN
-
VDDP_RUN
4.3.17.2 Reset Causes Handling submenu
4.3.17.3 Super IO Configuration submenu
Menu Item Options Description
Reset Button Pressed
Happened / Not
happened
If Reset button is pressed, this parameter will automatically be set as Happened
Clear from log Enabled / Disabled If Reset button is pressed and Clear from log parameter is enabled, this will require system reset
WDT Timeout Expired
Happened / Not
happened
If Watchdog Timer (WDT) timeout has expired, this parameter will automatically be set as Happened
Clear from log Enabled / Disabled
If Watchdog Timer (WDT) timeout has expired, and Clear from log parameter is enabled, this will require
system reset
Power Failure
Happened / Not
happened
If a Power Failure occurs, this parameter will automatically be set as Happened
Clear from log Enabled / Disabled If a Power Failure occurs and Clear from log parameter is enabled, this will require system reset
E.C. soft reset
Happened / Not
happened
If the Embedded Controller (E.C.) is reset, this parameter will automatically be set as Happened
Clear from log Enabled / Disabled
If the Embedded Controller (E.C.) is reset and Clear from log parameter is enabled, this will require system
reset
Menu Item Options Description
Serial Port 1 Enabled/Disabled Enables or Disables Serial Port # 1
Address
0X3F8, 0x3E8, 0x2F8,
0x2F0, 0x2E8, 0x2E0,
Select the Base address for Serial Port #1, if enabled.