Seco EASYSHRINK 15, Руководство по эксплуатации

Страница: 13 / 26

13
4.
USING THE DEVICE
4.1. Putting the device under tension
Switch on the main interrupter of the device.
On the keypad, the white LED will go on.
Display shows: POWER OFF.
4.2. Turning on the device
Switch on the module by pressing key .
Select the required mode on the control panel according to the Shrinkfit holder front end
type (see § 4.3.) and press key
Device is ready for a shrink grip or release heating cycle.
Switch off the control panel by pressing key .
4.3. Shrinking procedure
Wearing supplied protective gloves is imperative while handling the device
and Shrinkfit holders/tools.
4.3.1. Description of the different heating modes
AUTOMATIC MODES: User selects the required automatic mode on the control panel, no need to select the diameter.
CARBIDE 5800: optimised shrink grip & release of carbide and heavy metal tools in type 5800 holders
CARBIDE 5801: optimised shrink grip & release of carbide and heavy metal tools in type 5801 holders
CARBIDE 5603: optimised shrink grip & release of carbide and heavy metal tools in type 5603/5803 holders
CARBIDE 5600: optimised shrink grip & release of carbide and heavy metal tools in type 5600 holders
STEEL 5600: shrink grip & release of HSS and steel tools in type 5600 holders
STEEL 5800-5801-5603: shrink grip & release of HSS and steel tools in type 5800, 5801, 5603/5803 holders.