SECO-LARM Electric Door Strike with Vertical Adjustment
SECO-LARM U.S.A., Inc.
3
Mounting the Template:
Measuring the Latch Line & Center Lines:
1.
Measure the center line of the door. This is shown
as
"
Y
"
on the diagram to the left.
2.
Measure the distance from the door latch to the
edge of the door frame. This is the door latch line.
This is shown as
"
X
"
on the diagrams below.
Y
Door closed, sitting
inside door frame
Center
line
X
Door frame
Door
Door latch
line
1.
Measure distance "X" from the side of the door frame, and distance "Y" from the top of the
door frame. Use a pencil to mark the exact spot where the two lines intersect.
2.
Carefully peel off the short, thin tab in the center of the stick-on template. When placed
against the frame, this opening in the template will easily line up with the X-Y mark.
3.
Peel the template from the backing, and carefully apply it to the door frame.
X
Y
Note:
The electric strike must be installed in such a way and in such a location as not to impair
the operation of any emergency exit and panic-mounted hardware on the door.
Door closed, sitting
outside door frame
Door frame
Door
X
Door latch
line
