A
MPRO
TM
350 Owner's Manual
Page 9
With this optional feature, while your alarm is
armed, your car will not start, even if a thief
has your keys.
Your alarm also has Automatic Starter Disable
(ASD). If your alarm is set for active arming,
and you do not arm your alarm, ASD
automatically engages the starter disable 10
minutes after you disarmed the alarm or
turned the ignition switch OFF. The LED stays
ON constantly to show ASD is engaged.
Once engaged, you must press transmitter
button #1 to disengage ASD before the car
will start. (Programmable — ask your dealer.)
STARTER DISABLE
With this optional feature, whenever you
disarm the alarm, your car’s domelights turn
ON for 30 seconds. This helps find your car
at night and make sure no one is hiding in it.
If the alarm is triggered, your car’s domelights
flash together with the flashing parking lights.
2nd & 3rd CHANNEL OUTPUTS
DOMELIGHT SUPERVISION
Your transmitter has two extra channels to
control optional accessories:
A.
2nd channel
is commonly used
to "pop" the trunk. To use,
press transmitter button
#2 for 2 seconds,
either while the ignition
is ON and any door is
opened, or while the
ignition is OFF. Your dealer
can program 2nd channel operation to
either completely disarm the alarm or to
bypass all the alarm triggers for 10
seconds (bypass is great for popping open
the trunk). (Note — If no doors are
hardwired to your alarm, 2nd channel will
not operate with the ignition ON.) Ask your
dealer for details.
B.
3rd channel
is commonly
used for remote car
starting. Press
transmitter buttons #1
and #2 together anytime
for as long as needed.
Sensors that may be
triggered by the activation of the 3rd
channel device are bypassed until they are
restored to their normal state (the doors,
hood, and trunk remain protected,
though). In other words, if you remote
start your vehicle, the alarm protects it
from unauthorized entry.
With this optional feature, your alarm can
automatically lock the doors when armed and
unlock the doors when disarmed. The doors
lock and unlock any time transmitter button
#1 is pressed. For extra security, they lock
automatically if the alarm is triggered.
(Exception — See EMERGENCY CALL FOR
HELP, page 5.)
Your alarm can be programmed for ignition-
controlled operation (doors lock when you turn
the ignition ON, and unlock when the ignition
is turned OFF, but all car doors must be
closed). It can also be programmed to lock
the doors every time the alarm passively arms
(be careful not to leave the keys and transmitters
in the car, though!). Ask your dealer.
POWER DOOR LOCKS
