Youshiko YC8020 (White Colour),
MSF Radio control (UK Version)
Instruction Manual
One step easy set up:
Just put the batteries in the clock and wait for clock to
self set automatically
by MSF Radio
control system, with in few minutes to few hours or maximum by or between 01:00 am to
05:00 am, depending on the signal or location in UK. (After this you never have to do any
thing, Automatic time change for Spring & Autumn and automatic time checks).
Technical data:
`
Radio controlled Clock via MSF frequency.
`
Time in 12/24 hour format.
`
Manual time setting.
`
Continuous calendar up to year 2099.
`
Date and weekday display.
`
Temperature display in °C or °F
`
Automatic snooze function (5 minutes).
`
Thermometer: Indoor measurement ranges: -9.9°C ~ 59.9°C (calibration time: 30 seconds).
`
Battery: battery
1.5V “AA” size x 2pcs (not included).
Important information:
`
When you insert the batteries all the symbols on the display will briefly light up and you will
hear a signal tone, LCD full display for 2 seconds with beeping, then enter RCC reception
seven minute.
`
If this automatic setting process is unsuccessful, then use a sharply pointed instrument to
press the
Reset
button on the rear side of the RC Clock.
Please note: For manual time setting, before you set the time, you must
switch off radio control system first, by pressing the wave button
Manual time setting:
`
Press and hold down the “
SET”
button for 2 seconds, the 12/24 hour mode display starts to
flash. Now use “
▲
” and “
▼
“buttons to set the correct 12/24 hour mode.
`
Press “
SET
” to confirm your setting, the Hour display starts to flash. Now use “
▲
” and
“
▼
“buttons to set the correct hour.
`
Press “
SET”
to confirm your setting, the Minute displays starts to flash. Now use “
▲
” and
“
▼
“buttons to set the correct minute.
`
Press “
SET”
to confirm your setting, the Year display 2004 starts to flash. Now use “
▲
” and
“
▼
”
buttons to set the correct year.
`
Press
SET
to confirm your setting, the Month display starts to flash. Now use “
▲
” and “
▼
”
buttons to set the correct month.
`
Press “
SET”
to confirm your setting, the Date display starts to flash. Now use “
▲
” and “
▼
“
buttons to set the correct date.
`
Press “
SET”
to confirm your setting and to end the setting procedures, enter the clock
mode.
F.Y.I.:
`
After 30 seconds without pressing any button, the clock switches automatically from Set
Mode to Normal Time Mode.
Setting the daily alarms:
This Radio control possesses 1 daily alarms. To view the set alarm times, under the clock
mode, press once
ALARM
button, LCD display the “
” icon.
`
Press and hold down the
ALARM
button for 2 seconds until Alarm Time flashing icon is
displayed. Now use the “
▲
” and “
▼
“ buttons to select the alarm time you require and briefly
press the
ALARM
button to set this Alarm time.
`
The Hour display of the Alarm time starts to flash. Use the “
▲
” and “
▼
“buttons to set the
required hour. Press
ALARM
button to confirm your setting
