1. Auto Prepress
○ Enable / Disable a permanent pre-pressing.
2. Bluetooth
○ Enable / Disable Bluetooth.
3. Bluetooth PIN
○ You can use the rotary knob to save your individual PIN, which the app will
then prompt you to enter. The default PIN from factory is 255, which is
automatically recognized and used by the app.
4. Warning signal
○ Enable / Disable the warning signal before opening the press.
5. Sleep Mode
○ Setting the time interval in minutes, after which the press enters the Sleep
Mode.
○ In addition, the temperature the press should be cooled down to when in
Sleep Mode can also be set.
○ To completely disable Sleep Mode, set the time value to "0".
○ The active Sleep Mode can be exited at any time by pressing any button or
by actuating the press lever. The press will then restore the previously set
parameters.
6. Auto Off
○ Setting the time interval in minutes, after which the press completely turns off
the heating.
○ To completely disable Auto Off Mode, set the time value to "0".
○ The active Auto Off Mode can be exited at any time by pressing any button
or by actuating the press lever. The press will then restore the previously set
parameters.
7. Language
○ Setting the menu language.
8. Unit
○ Configuring the temperature unit. Celsius or Fahrenheit are possible.
Resetting the counter
Press the
key for 2s, display flashes briefly, le compteur est remis à
zéro (0)
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
12
