Material
Temperature
Pressure
Time
Flock film
170°C - 185°C
light-medium
25s
Flex film
160°C - 170°C
medium-high
25s
Sublimation flex
180°C - 195°C
medium-high
10s - 35s
Sublimation on
ceramic mugs
200°C
medium-high
150s - 180s
Sublimation on tiles
200°C
high
120s - 480s
(depending on thickness of
material)
Sublimation on
jigsaw puzzles
200°C
light-medium
25s
Sublimation
mousepads
200°C
medium
20s - 40s
Sublimation on
textiles
200°C
medium-high
30s - 50s
Sublimation on
metal plates
200°C
high
10s - 50s
(depending on thickness of
material)
Important note:
You should carry out your own tests with the transfer material and backing to be
used before starting production. The values given above and the manufacturer’s own figures are
only intended as a guide. You should establish the washability and behaviour during transfer in your
own tests.
The recommended values do not imply a guarantee. The user is responsible for determining and
using the appropriate setting for his particular conditions.
Note for textile work:
After pressing, allow textiles to cool down before removing any type of
backing from the transfer material. The hot glue in the transfer material develops its adhesive force
only in the cold state. If the adhesive does not stick in the cold state, it may have been pressed too
cold or for too short a time.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com