Overview
Secabo TC5, TC7 heat presses
The new Secabo TC5 and TC7 clam presses are automatically opening clamshell presses. It is not
necessary to wait, while the transfer is pressed. After the desired timer has finished, the heat
presses open automatically and anounce this with an acoustic signal (3 seconds before the end).
With a large digital controller, temperature and pressing time can be adjusted. A counter counts
the number of transfers that have already been made during the current session. The counter can
be reset at any time. The contact pressure can be adjusted with a wheel on the surface of the heat
plate. A quick change system for the Secabo TC5 und TC7 as well as different exchangeable
base plates are also available.
● press opens automatically
● digital controller for temperature, time and counter
● easily adjustable contact pressure
● suitable for caps and hats in all common sizes
● suitable for all common transfer methods
Safety precautions
Please read these instructions and safety precautions carefully before using your press for the first
time!
● Never reach into the heat press with your hands when it is connected to the power supply,
particularly when it is switched on and heated up – danger of severe burns!
● Never open the housing or attempt to modify the machine yourself.
● In case you are requested by the Secabo customer support to open the heating plate cover,
please make sure you are wearing respiratory protection and only touch the contained
insulation wool with gloves. Any disposal of the wool must be contained in a closed bag.
● Ensure that liquids and metal objects do not get into the inside of the heat press.
● Ensure that the power socket used is grounded. Note that it is only permissible to operate a
heat press from a power socket protected by a ground fault protection switch..
● Disconnect machine from power outlet when not in use!
● Never operate the heat press within the reach of children and never leave the machine
unsupervised when switched on.
● Ensure that the machine is used only in dry rooms.
If you cannot observe one or more of the safety precautions above, or if you are not sure
whether all points are satisfied, please contact our Technical Support Department.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com