Sebury B6 Plus, Руководство пользователя

Страница: 14 / 35

B6K2 Standalone Access Controller User Manual V1.0
NetDigital Security
http://www.netdigital.com.au
14
The first unlock zone Green
The second unlock zone Blue
Alarm Red quick flash Alarm Sound
3.1 Enter management menu operation mode
* (Hold on for more than 2 seconds), (Input admin password) #
Note: Admin password is a 6 digits number, 888888 is the factory default admin password. The MUST change the admin
password when they use device for the first time, otherwise user cannot continue other operations. After inputting the correct
admin password, the LED light will flash green for one time and then back to red flash status, all of the remaining operations
must be under this status.
3.2 Change admin password
00, (New admin password) #, (Repeat new admin password) #
Note: New admin password is a 6 digits number.
3.3 Set controller to Single-door mode
Factory default setting is single door mode, if user does not sure of the mode, please set it again, the steps please follow:
03, 1#
3.4 Set door opening time to 2S
The factory default door opening time is 2S, so if user request factory default time then no need to adjust the door opening
time just set the unlocking time of Access controller’s Special power supply to minimum time period. If user is not sure about
the time, please set it again as follow steps:
34, 2 #
3.5 Add User Card
10, read card, read card …repeat the operation till the last user card.
Note: the controller can read multi-cards continuously. When you hear a long “beep- “and indicator light turn to green it
means the new card added successfully. After user finish the last card, please press the * key to exit the add user card
status.
3.6 Add User PIN
11(ID) #, (User PIN) #, (ID) #,(User PIN) #, …repeat the operation till the last user PIN.
Note: The user ID range is from 1 to 20,000 and must not be added before. User PIN is a 4~6 digits number and this number
must not be 1234. Controller can add more users continuously, after the last user PIN please press the * key to exit the add