11
Synchronization of the determined weight with the "Fitbit-" and "Google Fit-
App”:
Start the "Fitdays-App" and activate "Google Fit" or "Fitbit" in the "Settings".
-
Note:
After activation you will be asked for the "Google Account" used for example. If no query is made, repeat
the process or restart the Fitdays app.
- After the query of the used Google account the permission is obtained that the data may be transmitted. If you
confirm this, the synchronization can be performed. To do this, start a measurement. The determined weight will be
displayed a few seconds later, e.g. on Google Fit. If this is not the case, restart the "Google Fit App".
Solve problems:
Replace the batteries!
Max. load capacity has been exceeded. Please leave the scale immediately to avoid damaging
the device!
If this error message appears on the display during the measuring process, exit the balance
and restart the device.
Technical Data:
Operating voltage:
6V DC
Battery type:
4 x 1,5V AAA
Measuring units:
kg/ lb/ st
Minimum load:
≥5kg/ 11lb
Maximum resilience:
≤180kg/400lb
Steps:
100g/ 0,2lb
Disposal note:
This product may not be disposed of with household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local
municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent
for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
Proper disposal of batteries and accumulators:
Batteries and rechargeable batteries may not be disposed in the household waste. The end-consumer are legally
obligated to the return of all used batteries and/or accumulators. After usage you can return batteries and / or
accumulators gratuitous in the sales point or in their direct vicinity (for example at municipal collection points and
trade). Otherwise, you can also return the batteries and / or accumulators by post to us.
Содержание SC_BODY_BT_A
Страница 1: ...1 SC_BODY_BT_A 1 2 3...
