Sebart KatanaS 120 ARF, Инструкция по сборке

Страница: 42 / 43

Wings installation
Locate the wing panels and fix them using the two 4mm screws, included in the hardware pack, and
a Phillips screwdriver.
Control throws
We recommend the use of a computer radio, that will allow you to do quite a bit of fine-tuning of
the feel of the Katana, which will make aerobatics even easier.
Please, follow carefully the recommended linkage setups:
For the AILERON we recommend the following throws:
Low rate:
20° up / 20° down
Expo:
40%
3D rate:
45° up / 45° down
Expo:
80%
For the ELEVATOR we recommend the following throws:
Low rate:
20° up / 20° down
Expo:
25%
3D rate:
60° up / 60° down
Expo:
80%
For the RUDDER we recommend the following throws:
Low rate:
30° left / 30° right
Expo:
30%
3D rate:
50° left / 50° right
Expo:
60%
Note:
the
Expo
is (
+
) for JR systems, and (
–
) for Futaba systems.
Mixing
For best performance, we recommend a linear-mix*:
Rudder Æ Elevator UP
When you give full rudder to the right or left side, the elevator have to go up (positive) approx. 6%
* if you have a programmable computer radio.
42