Sebart KatanaS 120 ARF, Инструкция по сборке

Страница: 6 / 43


step 4
Once satisfied with the fit, glue the wing fillet to the wing panel using medium CA.
Use the glue carefully avoid over runs onto the area to be covered with the material.

step 5
Use the covering iron carefully, at a medium temperature, to glue the cover material down around
the area of the fillet. Use caution while working around areas where the cover material overlaps to
prevent separating the covers.

step 6
Repeat steps 1 through 5 for the remaining wing panel and wing fillet.
6