sebaKMT HL 50, Руководство пользователя

Страница: 11 / 25

11
Accessory part Description Art.Nr.
PAM T-3-1 Robust sensor-rod microphone for soft grounds;
incl. connection cable 1003846
LOG TP Tripod adaptor 128309877
AD S-20 Valve adaptor (Ø 20 mm) 810000357
AD S-42 Valve adaptor (Ø 40 mm) 810000358
Headphones
The HL 50 comes with wireless headphones. These have the following operating
elements:
ON / OFF … ON/OFF switch
TUNE … Frequency selection control dial
VOL … Volume control dial
Via the audio socket , any corded headphones can be connected to the HL 50.
After connecting the headphones, the HL 50 has to be restarted. The headphones are
recognised automatically by the device. While there are corded headphones connected,
the use of the wireless headphones is not possible.
The volume of the headphones can be adjusted via the buttons and .
After removing the corded headphones, the HL 50 does not automatically switch back to
the wireless headphones mode. The device needs to be restarted for this purpose.
Energy Supply
The device is delivered with the following batteries:
2 x 1.5 V AA LR6
Alternatively, rechargeable 1.2 V NiMH batteries can be used (min. 1800 mAh).
When the battery level is low, a flashing battery symbol appears at the top of the
display.
Empty batteries can be replaced. For this purpose, loosen the screw at the backside of
the device and remove the cover. Pay attention to the correct polarity when inserting the
new batteries. Then re-attach the cover and tighten the screw carefully.
Don´t overtighten!
Please act carefully and without violence at all times, in order to avoid
damaging the components.
Wireless headphones
Corded headphones
English