PrimeTest 300
Operating
Instructions
Asset ID
can be set to Increment at the end of each
test, present a blank field or Repeat Last ID.
On Test Failure
field can be set to either End Test,
which will terminate a test sequence if a test failure
occurs, or Fail Menu, which will present a list options in
the event of a test failure.
The field descriptor for each
Comments Line
can be
changed to show Notes, Asset Description, Asset
Group, Make, Model or Serial Number as required.
10.2 Preferences
There are a number of general features within the
PrimeTest 300 that can be setup/customized for
individual users
Press
Menu
(F4). Use the arrow keys to highlight and
select
User Options
followed by
Preferences.
Press
OK
(F4).
The first field shows the User Name. Any changes made
to these preferences will be stored against this User
only. Use the up/down arrow keys to highlight the
desired feature. Once the preferences have been setup
press
OK
(F4) to store the changes.
Esc
(F2) will exit
this screen without saving the changes.
10.2.1 Display
Time
This feature allows the time to be displayed on the LCD.
Use the left/right arrow keys to adjust.
10.2.2 Set
Contrast
This feature allows the contrast of the display to be set.
Use the left/right arrow keys to adjust.
10.2.3 Auto Off Time (mins)
The PrimeTest 300 will power itself off after a period of
inactivity. This time is set here. Use the left/right arrow
keys to adjust the value between 1 minute and 10
minutes.
- 37 -
