PrimeTest 300
Operating
Instructions
The User Test Name will now be highlighted. For
convenience a selection of commonly used names have
been entered. Use the left/right arrows to scroll through
the factory-programmed names or enter a new name
using the keypad and edit function keys.
Now, using the down arrow, move the highlight bar to
the User Test Units field. Again, a selection of commonly
used units is available for convenience. Select the
required units using the left/right arrow or enter new
units using the keypad.
The screen below shows a User Test created to record
microwave leakage in mW/cm
2
.
An example test sequence created to measure
microwave leakage is shown below.
- 33 -
