Page
17 of 22
SeaViewer DVR-SD Manual
02/15/2011
6.2 Manage the power
（
（
（
（
1
）
）
）
）
Use the ignition to control the power
1. Connect the ignition to the yellow wire of the power cable. And connect the red and black
wire to the “+” and “-” pole of battery.
2. Set the power off delay. Select “POWER OFF DELAY” in the “POWER” sub menu. The
maxiam duration for the power off delay is 86400 seconds(24 hours). If the power off delay is
set to 0, the recorder will turn off immidiately if the ignition is off.
If the vehicle is using low level as ignition, you need to set the ignition signal to low level.
（
（
（
（
2
）
）
）
）
Turn on/off the recorder automatically
1. Connect the DVR to the battery. Please note that you need to connect the yellow wire
(ignition wire) to the “+” pole (+12V or +24V) of the battery.
Battery
Fuse
+
Recorder
Red
wire
Ignition
-
Yellow
wire
Black wire
DVR
