Page
16 of 22
SeaViewer DVR-SD Manual
02/15/2011
DO NOT ATTEMPT ANY OF THE OPERATIONS BELOW !
THE INFORMATION IN THE REMAINDER OF THIS DOCUMENT IS
PROVIDED FOR REFERENCE ONLY
6. Appendix
6.1 Power supply
1, Power Input connector
PIN
Color
Description
2
Red
+12V (+24V) wire
4
Yellow Ignition wire
6
Black
Ground wire
NOTE
1
．
The DVR uses DC power input, please be very careful when connecting to the “+” and “-”
of the power supply.
2
．
Wide voltage range of 8V-32V for the DVR. The DVR may be damaged if the voltage comes
too high. And the DVR may not work if the voltage comes too low.
3
．
Power of the DVR should be supplied by the battery.
4
．
All the cables for connecting from power to the DVR should be thick enough for current
over 5 Amperes.
5
．
To protect the battery from being damaged of short circuit on the cable, the fuse should be
placed very closed to the battery.
PIN 1
PIN 3
PIN 5
PIN2
PIN 4
PIN 6
