Troubleshooting Tips
No Picture on TV:
1. Decoder not plugged in.
Plug Decoder into wall outlet.
2. Video cable not plugged in or loose. Check video cable connections.
3. Video Input not selected on TV.
Consult manufacturer's
instructions for TV.
Picture (blank screen or snow) on TV but no picture from Camera:
1. Video Input not selected on TV.
Select correct video input.
2. Camera not receiving power.
Make sure fixture is getting
power.
Picture from camera is tilted or upside down:
1. Rotate camera several clicks and check the picture. Repeat until
picture appears "right side up." (NOTE: Camera rotates only in
a CLOCKWISE direction. Turning the camera counter-
clockwise will remove it from the socket.)
2. If the fixture is adjustable, use the adjustments to set the correct
view.
Picture is washed out (over-bright)
1. Check the controls on your TV; make sure they are set properly.
2. There may be a source of reflected glare in the viewing area.
Examples: large concrete driveways, white pool decks, sun on
vehicle trim or windshields, glass windows, or water. Re-position
the light socket and/or the camera to eliminate the source of glare.
3. In early morning or late afternoon, the sun may shine directly into
the camera lens. This will not damage the camera, but will cause
a poor picture for an hour or two. Relocating the camera can
eliminate or reduce the effect.