INSTALLATION
Installing the SecureView
®
"light bulb camera"
OUTDOOR MODEL
The SecureView
®
video security camera is designed to look
exactly like a standard PAR-38 outdoor floodlight, and will fit in
most fixtures designed to accept the PAR-38 style lamp. Shown
here is a typical installation in a 2-socket outdoor fixture.
1.
Disconnect power to the circuit.
2.
Remove the existing flood lamp.
3.
Screw in the SecureView Camera until
the ratchet clicks.
4.
Install the decoder and connect it to a TV
(see "Installing the SecureView Decoder")
5.
Reconnect power to the circuit.
6.
Turn camera clockwise on the ratchet
until the picture is "right side up."
(NOTE: Camera rotates only in a
CLOCKWISE direction. Turning the
camera counter-clockwise will remove
it from the socket.)