RTX 2251 – RTX 2252
868 MHz radio system to be used as safety device in the automation of slid-
ing gates and rolling gates (EN 12978). It consists of one transceiver device
(Base) RTX 2251 to be connected to a motor control unit, and of one or more
battery operating transceiver devices RTX 2252 (Sensor), for the connection
of 8.2 kohm resistive and mechanical safety edges, normally found in the
gate’s mobile part. System corresponding to Category 2 of EN13849-1.
i
mportant
For
the
user
- The device must never be used by chil-
dren or persons with reduced phys-
ical-psychological abilities, unless
supervised or trained on the functioning
and the use modalities.
- Do not allow children to play with the
device and keep the radiocontrols away
from their reach.
- Ensure there is no-one immediately
near-by until the door is not fully open or
closed.
- ATTENTION: keep this instruction man-
ual and respect the important safety
prescriptions contained herein. The non
compliance with the prescriptions may
cause damages and serious accidents.
- Frequently examine the plant to detect
any signs of damaging. Do not use the
device if a repair intervention is nec-
essary.
W
arning
:
All operations that require the
opening of the casing (cables connection,
programming, etc.) must be carried out by
expert personnel during installation. For
any further operation which requires the
casing to be re-opened (re-programming,
repair or installation amendments) contact
the after-sales assistance.
i
mportant
For
the
installer
-
The RTX 2251-RTX 2252 radio system is
designed to help the installer to auto-
GB
11
