Seatex DPS 132, Руководство по установке

Страница: 69 / 108

Seatex DPS 132 Installation Manual, rev. 0 Appendix D - DPS setup file
57
Appendix D - DPS setup file
!------------------------------------------------------------------------------*
!- DPS SETUP FILE. *
!- *
!- This is the setup file where user configurations are entered. *
!- *
!- This is not the only place to configure DPS. Some settings are done under *
!- Windows registry and some settings are done in TXT and DEF files. These *
!- settings does not affect the operational scenario of the DPS system and *
!- are not to be changed by users or service personnel. *
!- *
!- Lines with text embraced by [ and ] are section names, used by some parsing *
!- programs for navigation within this setup file. All descriptive text about *
!- a section, i.e. comment lines (starting with ! or # characters), should be *
!- placed immediately BEFORE the section names. *
!- *
!- Generally, do NOT alter the position of the setup information in this file, *
!- just modifiy existing values or add new information within the related *
!- section. *
!- *
!------------------------------------------------------------------------------*
!--------------------------- DP INTERFACE AND DECODING ------------------------*
! A total of 9 DP Interfaces may be set up, starting at 1 *
! *
! Comm parameters: nh:no handshake, sh:software handshake, *
! hh:hardware handshake *
! Comm parameters: nh:no handshake, sh:software handshake, *
! hh:hardware handshake *
! DATUM_n Datum to use for position output (text). *
! Valid selections: WGS84, ED50, NAD27. Default is WGS84 *
! OUTPUTMODE_n 0: event-driven 1:timer-driven *
! OUTPUTINTV_n output interval between datagrams in ms *
! NMEA_OUTPUT_n Sequence of NMEA messages to send to DP *
! Messages conform with NMEA 0183 Version 2.2 unless *
! otherwise noted. *
! DPINTERFCONSOLE_n Console mode - 0: no console, 1: console, 2: Show NMEA *
! TIME_PRECISION_n Precision of time output, default 2 *
! POSITION_PRECISION_n Precision of position output, default 6 *
! *
! UTM Settings are only used when ARABB telegram is selected *
! UTM_MODE_n UTM mode: *
! 0:AUTO_EX, automatic zone calculation with extended zones *
! 1:AUTO_NOT_EX, automatic zone calculation *
! 2:MANUAL, manual zone input *
! UTM_ZONE_n UTM Zone: 1-60 (used when MANUAL UTM mode is selected) *
! UTM_ZONE_OFFSET_n UTM Zone Offset : range +/-3.0 (MANUAL UTM mode) *
! *
! *
! Supported NMEA messages (for NMEA_OUTPUT_n) : *
! *
! NONE No output *
! ARABB Absolute position (ABB DP) *
! ABBDP Non-NMEA ABB DP telegram with Position, speed and course *
! ARTEMIS Non-NMEA ARTEMIS emulation (BCD,01 telegram) *
! CRYPT_FUG Cryptated position output *
! DPGGA NMEA UKOOA/IMCA DGPS Interfacing format. *
! WARNING: Not fully compatible with GPGGA. Systems not *
! distinguishing talker ID in the NMEA telegrams might*
! face problems with this telegram ! *
! GNS Fix data for single or combined satellite navigation *
! systems (GNSS) *
FSP ref.: A11211400XRBRA0