Seatex DPS 132, Руководство по установке

Страница: 20 / 108

Seatex DPS 132 Installation Manual, rev. 0 Installation
8
•
Additional cables for input of DGPS corrections.
•
Additional cables for output to external DGPS equipment.
General Arrangement drawings of the ship should be acquired to simplify GPS antenna
mounting and to estimate sufficient lengths of cable.
For external interfaces, electrical characteristics and data formats must be provided as well as
necessary cables and connectors.
3.2 Logistics
Safety: General safety guidelines should be followed when working in mast and on deck.
Personnel qualifications: Trained electrical workers.
Minimum number of personnel: 2.
Special tools required: None.
3.3 Location of the system parts
Recommended locations for the DPS 132 unit and the antennas are described below.
3.3.1 DPS 132 unit
The DPS 132 unit is designed for indoor installation and should not be exposed to heavy
vibrations, transformers or similar.
The unit has internal fans and requires free airflow in front and rear of the unit. It is
recommended that ventilation/air conditioning is provided in order to keep the ambient
operating temperature 20
°
C. It is also recommended that the area around the unit is
kept free from dust and static electricity.
All connections to the unit are on the rear side of the cabinet and available space for cable
connections and service must be provided.
Since the keyboard is located in the cabinet, the distance between the monitor and the cabinet
should be limited to a practical range where the monitor may be seen and read from the
position of the cabinet.
Note The recommended keyboard cable length is 3.3 m (10 feet) maximum without
degradation. If longer keyboard cable is needed, please use keyboard extender.
FSP ref.: A11211400XRBRA0