Seat Mii 2020, Руководство пользователя

Страница: 85 / 228

Visibility
other obstacles on the windscreen may
damage the wiper and the windscreen wip-
er motor.
● If necessary, remove snow and ice from
the windscreen wipers before starting your
journey.
●
Carefully lift the frozen windscreen wip-
ers from the glass. SEAT recommends a de-
icer spray for this operation.
●
Do not switch on the windscreen wipers if
the windscreen is dry. Cleaning with the
windscreen wipers while dry can cause
damage.
● In icy conditions, always check that the
wiper blades are not frozen to the glass be-
fore using the wipers. In cold weather, it
may help to leave the vehicle parked with
the wipers in service position
›››
page 43 .
Note
● The windscreen and window wipers only
function when the ignition is switched on
and the bonnet or rear lid, respectively, are
closed.
●
The interval wipe speed varies according
to the vehicle speed. The faster the vehicle
is moving, the more often the windscreen is
cleaned.
●
The rear wiper is automatically switched
on when the windscreen wiper is on and the
car is in reverse gear.
Wiper functions
Windscreen wipers performance in differ-
ent situations
●
If the vehicle is stopped, the activated posi-
tion temporarily moves to the previous posi-
tion.
●
When wiping at intervals, the intervals vary
according to the speed. The higher the vehi-
cle speed the shorter the intervals.
Note
The wiper will try to wipe away any obsta-
cles that are on the windscreen. The wiper
will stop moving if the obstacle blocks its
path. Remove the obstacle and switch the
wiper back on again.
Rain sensor*
Fig. 85
Wiper lever: adjust the rain sensor
A.
Fig. 86 Rain sensor sensitive surface
The rain sensor controls the frequency of the
windscreen wiper intervals, depending on the
amount of rain
›››
. The sensitivity of the rain
sensor can be adjusted manually. Manual
wipe
›››
page 82 .
Move the lever to the required position
›››
Fig. 85 :
Rain sensor off.
Rain sensor on; automatic wipe if neces-
sary.
Setting sensitivity level of rain sensor
–
Set control to the right: high sensitivity.
–
Set control to the left: low sensitivity.
When the ignition is switched off and then
back on, the rain sensor stays on and starts
operating again when the windscreen wipers
are in position
1
and the vehicle is travelling
at more than 16 km/h (10 mph).
»
0
1
A
83