Seat Mii 2020, Руководство пользователя

Страница: 39 / 228

Self-help
● Remove the bottle from the valve.
●
Place the insert back into the tyre valve us-
ing the tool
›››
Fig. 29
1
.
Inflating the tyre
●
Screw the compressor tyre inflator tube
›››
Fig. 29
8
into the tyre valve.
●
Check that the air bleed screw is closed
›››
Fig. 29
6
.
●
Connect the vehicle's drive system.
●
Insert the connector
›››
Fig. 29
9
into the
vehicle's 12-volt socket
›››
page 97 .
●
Turn the air compressor on with the
ON/OFF switch
›››
Fig. 29
5
.
●
Keep the air compressor running until it rea-
ches 2.0 to 2.5 bar (29-36 psi/200-250 kPa).
A maximum of 8 minutes .
●
Disconnect the air compressor.
●
If it does not reach the pressure indicated,
unscrew the tyre inflator tube from the valve.
●
Move the vehicle 10m so that the sealant is
distributed throughout the tyre.
●
Screw the compressor tyre inflator into the
valve.
●
Repeat the inflation process.
●
If the indicated pressure still cannot be
reached, the tyre is too badly damaged. Stop
and request assistance from an authorised
technician.
● Disconnect the air compressor. Unscrew
the tyre inflator tube from the tyre valve.
●
When the tyre pressure is between 2.5 and
2.0 bars, continue driving without exceeding
80 km/h (50 mph).
●
Attach the sticker
›››
Fig. 29
2
to the in-
strument cluster, within the driver's visual
field.
●
Check the pressure again after 10 minutes
›››
page 37 .
WARNING
When inflating the wheel, the air compres-
sor and the inflator tube may become hot.
●
Protect hands and skin from hot parts.
●
Do not place the hot flexible inflator tube
or hot air compressor on flammable mate-
rial.
●
Allow them to cool before storing the de-
vice.
●
If it is not possible to inflate the tyre to at
least 2.0 bars (29 psi / 200 kPa), the tyre is
too badly damaged. The sealant is not in a
good condition to seal the tyre. Do not con-
tinue driving. Seek specialist assistance.
CAUTION
Switch off the air compressor after a maxi-
mum of 8 operational minutes to avoid
overheating! Before switching on the air
compressor again, let it cool for several mi-
nutes.
Check after 10 minutes of driving
Screw the inflator tube
›››
Fig. 29
5
again
and check the pressure on the gauge
6
.
1.3 bar (19 psi / 130 kPa) and lower:
●
Stop the vehicle! The tyre cannot be
sealed sufficiently with the tyre mobility set.
●
You should obtain professional assistance
›››
.
1.4 bar (20 psi / 140 kPa) and higher:
●
Set the tyre pressure to the correct value
again.
●
Carefully resume your journey until you
reach the nearest specialised workshop with-
out exceeding 80 km/h (50 mph).
●
Have the damaged tyre replaced.
WARNING
Driving with an unsealed tyre is dangerous
and can cause accidents and serious in-
jury.
● Do not continue driving if the tyre pres-
sure is 1.3 bar (19 psi / 130 kPa) and lower.
●
Seek specialist assistance.
37