![Seat Mii 2020 Скачать руководство пользователя страница 194](http://html1.mh-extra.com/html/seat/mii-2020/mii-2020_owners-manual_1229331194.webp)
Practical tips
used. Rolling noise, wear and energy con-
sumption will all be reduced.
Snow chains
Snow chains should
only be used on the
front wheels
.
●
Check that they are correctly seated after
driving for a few yards; correct the position if
necessary, in accordance with the manufac-
turer's fitting instructions.
●
Keep your speed below 50 km/h (30 mph).
Snow chains will improve
braking ability
as
well as
traction
in winter conditions.
For technical reasons snow chains may only
be used with the following wheel rim/tyre
combination.
165/70 R14
Chains with links of maximum 15 mm
175/65 R14
Remove any central wheel trims and the rim
ring before fitting snow chains.
WARNING
The use of unsuitable or incorrectly fitted
chains could lead to serious accidents and
damage.
●
Always the appropriate snow chains.
●
Observe the fitting instructions provided
by the snow chain manufacturer.
●
Never exceed the maximum permitted
speeds when driving with snow chains.
CAUTION
●
Remove the snow chains to drive on
roads without snow. Otherwise they will im-
pair vehicle handling, damage the tyres
and wear out very quickly.
●
Wheel rims may be damaged or scratch-
ed if the chains come into direct contact
with them. SEAT recommends the use of
covered snow chains.
Tyre pressure monitor sys-
tem*
Control lamp
It lights up
The tyre pressure of a wheel is much lower than the
value set by the driver
›››
Several control and warning lamps light up
for a few seconds when the ignition is switch-
ed on while the function is verified. They will
switch off after a few seconds.
WARNING
Observe the safety warnings
trol and warning lamps on page 66
.
Tyre pressure monitor system*
Fig. 169
In the glove box: tyre pressure loss in-
dicator button.
The tyre pressure loss indicator compares the
revolutions and thus the wheel diameter of
each wheel using the ESC. If the wheel diam-
eter of a wheel changes, the control indicator
of the tyres informs of this fact
. The wheel
diameter changes when:
●
Tyre pressure is insufficient.
●
The tyre structure is damaged.
●
The vehicle is unbalanced because of a
load.
192
Содержание Mii 2020
