Mobile phone system*
91
– Give the command
CORRECT
.
If the PIN code is more than 8 digits long, the speech control system will
decline and give the cue
The PIN is too long
. If the specified PIN code is incor-
rect, the system will say
The PIN is incorrect
. If the wrong PIN code is entered
three times in a row, the SIM card will be blocked. You can unblock the SIM
card by entering the PUK code (personal unblocking key) via the keypad of
your mobile phone.
Dialling a number
A telephone number can be specified to the system and then
dialled.
– Switch on the speech control system
– Say the command
DIAL NUMBER
. The speech control system will
ask you to enter a telephone number.
– Say the digits of the telephone number individually or in groups.
After each block of digits you specify (separated by a brief pause)
the system will repeat the digits.
– Say
DIAL
when you have completed the number entry. The tele-
phone number will be dialled.
Redialling
– Switch on the speech control system
– Say the command
REDIAL
. The last telephone number you used
will be dialled.
Note
On some mobile phones, the number you dialled last is placed at the bottom
of the list. In this case, the redial function of the speech control system
cannot be used.
media_systemE_EN.book Seite 91 Montag, 21. September 2009 1:48 13