MEDIA
53
Scan CD tracks
– Press the corresponding
CD Control
button in the audio CD
menu.
– By rotating and pressing the control knob, select
SCAN
.
Pressing the control knob activates automatic track scan. Each track on the
CD will be played for a few seconds.
When the button is pressed again, scanning stops and the track currently
being played will continue to play.
Note
If you have set
Repeat
, for a single
Track
in the CD setup menu, you cannot
use the SCAN function.
Repeat ("RPT")
– Press the corresponding
CD Control
button in the audio CD
menu.
– Select
RPT
by rotating the control knob
– Select
off
,
CD
or
Track
.
•
Off
function: The
Repeat
function is switched off
•
CD
function: The current CD tracks are repeated.
Fig. 60 CD: Scanning a
track
Fig. 61 CD: Repeat
Fig. 62 Repeat
media_systemE_EN.book Seite 53 Montag, 21. September 2009 1:48 13