Seat Inca 2020, Руководство пользователя

Страница: 168 / 214

Before changing a bulb switch off the
light concerned.
Do not touch the glass part of the new
bulb with bare fingers because the finger
marks left on the glass evaporate when
the bulbs becomes hot and the vapour
condenses on the reflector, dimming it.
Always replace a burnt bulb with a bulb of
the same type and rating. The type num-
ber appears on the base of the bulb or on
the glass.
We recommend you always carry a box of
spare bulbs in the vehicle. At the very
least, carry the spare bulbs of the types
listed below since they are essential for
driving safety:
Main headlight bulb
•
Open bonnet
•
Pull spring catch (arrow) up and remove
cap.
On some models before changing the
right-hand headlight bulb it is necessary
to remove the cover. Pull the cover up on
the tab. The headlight bulb cover is now
accessible.
•
After changing the bulb, replace the
cap with the two lugs down and slide it
forwards until the spring catch engages.
3.70 –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– IF AND WHEN
TIPS AND MAINTENANCE
Changing bulbs
IN0-057
12 V60/65 W Double headlight (H4)
12 V 21 W Turn signal
12 V 21 W Brake light
12 V 5 W Tail light
12 V 4 W Side light
12 V 5 W Number plate light
glass base Additional brake light