Seat 2015 LEON CUP RACER, Техническое руководство, Страница: 39 / 49

TECHNICAL MANUAL LEON CUP RACER
38 de 48
5 WORKSHOP MANINTENANCE
FIRST ROLLOUT 5.1
SEAT Sport checks all cars in a rollout before customer delivery. This rollout consist in 5 laps in a circuit,
reaches high speed in a long straight and check the launch control in a standing start. After the rollout the
SEAT Sport engineers check the data acquisition and all car functions.
IMPORTANT: Although the SEAT Sport is doing a rollout check is strongly recommended to carry
out a suspension check before first
’s customer rollout and after the first free practice.
(sub-frame, power train, engine brackets, etc, fixations.)
Check list 5.2
After any rebuild or main job is recommend to carry out a check list. It’s possible do it with a lap top with
RaceStudio3 program or direcly to the car display.
CHECK LIST with ENGINE STOPED OK
ENGINE Oil level On the dipstick mark / Toil > 70
⁰
C
Water
On the bottle mark
BRAKE Brake fluid On the bottle mark
CHECK STEERING WHEEL FUNTIONS OK
FUNCTIONS
Rain Lights
Driver Fan
Page Change
Safety Brake Signal
Diff Map Change
Windscreen Water
Wiper
High Beam
AIM on-line conditions CHECK LIST with ENGINE IN IDLE SPEED Value
OK
ENGINE Water Temp
87ºC / 92ºC (thermostat cicle)
Fan Active at 92ºC
P oil (WT<25ºC) 4 bar
P oil (WT>25ºC) 2,5 bar
P fuel low > 4,1 bar
Alternator > 13,5 volts
Boost Press
0,3 bar @ 2500rpm
Speed limiter Gear 4 @ 60km/h
GEARBOX Tipp TS Changing gears / check SWM signal -- +
Nº gear display
DIFF Activar Pump
FUSEBOX FLAG_FBX_1 0
FLAG_FBX_2 0
FLAG_FBX_3
0
FLAG_FBX_4 0
FLAG_FBX_5 0