Seat 2015 LEON CUP RACER, Техническое руководство, Страница: 14 / 49

TECHNICAL MANUAL LEON CUP RACER
13 de 48
“P” parking mode:
Use parking mode to lock the transmission trough a mechanical cable. Use only this position when you
want block the car.
 It’s only possible lock or unlocks the parking mode if the car is completely stopped and the brake
pedal is pressed.

IMPORTANT: Never try to put the gear
lever in “P” if the car is not completely stopped. If this
happens the gear box might be seriously damaged.

If for any reason is not possible to move the lever from
“P” position although you are pressing the
brake pedal, through the safety grey button
“sign (P)” on the steering wheel module is possible to
unlock the gear lever command.
“R” reverse mode:
 It’s only possible to put on and take out the “R” (reverse) mode if the car is complete stopped and
brake pedal is pressed.
“N” neutral mode:
 In “N” mode, it is possible to move the car pushing externally (pit lane use).
“D” automatic mode:
 Not advisable for race. “D” mode is only advisable to move the car on the paddock zone. The
gear shifting is working in a low range of engine speed.
“S” automatic mode:

Pushing the gear lever backward one time when lever is in
“D” the “S” mode will be engaged
.
Driver display will shows now
“S”. (left up corner)
 Use “S” mode to drive in automatic shifting. Simultaneously is possible to use the steering
paddles.
 It’s possible to use “S” mode in the launching system. The gear will shift up automatically. The
driver can pass to Tip mode in any moment.
 It’s possible to pass from “D” or “S” to Tip and backwards always and in any moment.
“Tip” manual mode: “TS”
(the most advisable for motorsport)
 From the “S” gear lever position move the gear lever to the right side. Driver display will show
“
TS”
mode.
 Use “TS” mode for drive in manual mode, handling the shifting by the steering paddles.
 “TS” the shifting is manual. When the engine will reach rpm limit the power will limit (6800 rpm).

Downshift is protected preventing the engine rpm overriding. Shift demand will be active for one
second.
Car launching systems 2.4
There are two car launching systems for the standing starts, manual or automatic launch system.
“LCS” LAUNCH CONTROL SYSTEM -AUTOMATIC-
LCS allows you to perform a semiautomatic car launching. This system is automatically activated if wheels
are absolutely stopped and brake pedal is pressed.
Launching time after brake signal pedal off: