background image

YOUR RESPONSIBILITIES

You must read and follow the instructions in this user manual. You must attach the rack correctly to your 

vehicle, check it before each use, and perform any necessary maintenance. The correct attachment of the 

rack to your vehicle is critical and is in your exclusive control.
You must attach your cargo correctly to the rack. The correct attachment of cargo to your rack is critical and 

is in your exclusive control.
You must inspect the indicator bands on all SeaSuckers when entering and exiting your vehicle. A quick 

glance will tell you if the rack is at full power. If the indicator band is visible, you must re-pump the 

SeaSucker before the rack can be used. 
You must clean, repair, or replace any of your SeaSucker vacuum mounts that do not hold vacuum for at 

least 4 hours. Your rack comes with an extra SeaSucker vacuum pump; keep it with your rack in case you 

accidentally damage one. 
You must not overload your rack. The maximum recommended load is 165 pounds (74.8 kilograms). 

Carrying loads above 165 pounds may damage both your rack and the roof of your vehicle.
You must obey all posted speed limits and traffic conditions; if there is no posted speed limit, we 

recommend not driving above 85 miles per hour. You must adapt your driving style and speed to road 

conditions, weather conditions, and the load on your SeaSucker rack.

Содержание SX6150










Отзывы: