SeaSTAR 3510LR, Руководство пользователя

Страница: 40 / 50

SeaSTAR 3510LR USER MANUAL
Issue 1.0 11/04
32
Figure 2.
In Figure 2 various information and status is display. In the ‘3500 Receiver
Configuration’ frame, as shown in Figure 3, the serial number, group number,
channel and manual stations are displayed. The ‘Serial Number’ is used for
subscribing receivers for differential corrections. The ‘Group Number’ is the group
to which the receiver belongs but is rarely used anymore and is default to 0. The
‘Channel’ is the DGPS service that the receiver is tuned into. The ‘Manual
Stations’ is a list of reference stations to use when the receiver is generating the
DGPS corrections. This is often blank meaning that it is automatic.
Figure 3.
In the ‘Static Information’ frame of Figure 2, the software versions and detector
mode of the receiver is displayed, as shown in Figure 4. The ‘Software Version’ is
the version of the software in the receiver. This version number is more important
than the ‘Firmware Version’, which is a more general software version and is
updated less commonly. The ‘Detector Mode’ controls how the receiver processes
data and the output format of the differential corrections received over the
OmniSTAR channel. This commonly VBS or RTCM, however RAW and VRC can
be used. When the receiver is set for VRC, the reference position is displayed
below the detector mode as shown in Figure 4.