© 2003 Marine Canada Acquisition Inc. DBA SEASTAR SOLUTIONS 3831 No. 6 Road, Richmond, B.C. Canada V6V 1P6
Fax: 604.270.7172
Web:
www.seastarsolutions.com
INSTALLATION INSTRUCTIONS
Copy Par t# 764607, Rev. E, 08/2013
Page 2 of 2
WARNING
Use self-locking type fasteners only; substituting non-self locking
fasteners can result in loosening or separation of equipment and
loss of steering control. DO NOT exceed 110 in./lbs. (12 Nm)
torque on helm and wedge nuts and bolts.
CAUTION
NPT fitting installations only. Apply a liquid, Teflon based pipe
sealant onto the threads going into the helm pump and/or
steering cylinder. Tighten fitting 'HAND-TIGHT'. Using a wrench
tighten an additional 1.5 turns. Continue to tighten until
desired orientation is achieved.
If printing or photocopying of this template is required, please
check all measurements BEFORE you drill any holes to ensure
that the template you have printed is true and correct.
CAUTION
