OPERATION
Using sales demo program
- Press “
>
” button to start the sales demo mode
program. The
digital display will always show “
1:23
”. Pressing buttons will
turn the corresponding wash cycle light on.
Exiting sales demo program
- Press and hold “
>
”and
Delay
buttons, then
turn dishwasher off to exit program. Pressing on/off button during sales
demo program shows how dishwasher resets, but does not reset
dishwasher, turn dishwasher off or exit sales demo program.
Sales demo program*
Digital
display
P7
Preparing a dishwasher for showroom use
Unlike with traditional dishwashers, do
NOT
disconnect drain pumps when
using sales demo programs. Dishwasher controls run safety checks – if drain
pumps or heat pumps are disconnected, dishwashers will
NOT
run.
No disconnections are needed – just add one (1) gallon of water (with a 1/2
capful of bacteria stat) to dishwasher tanks -- do
NOT
add bleach.. Heat pumps
will run and lights will light when program buttons are pushed. Drain pumps do
not run. It’s not necessary to plug drain hoses, but it’s a good practice to
prevent any possible water leakage.
Dispenser
Closing and opening dispenser doors
Slide door forward and press down firmly until
you hear a click.
Push the button as shown.
702_58300000150187_ara_en_a