Seamax Inflatable Boat – English User Manual
- 20 -
Inflate the floor with provided foot pump. Once inflated, inspect and become familiar with the design and how it will fit
in the boat. Once you are familiar with the floor, deflate (push the valve stem in and twist) the air mat. Take the air
series boat and lay it on a clean flat surface, pump the boat air champers to about 50% of its capacity. This will pull the
fabric away from the inner sides of the boat chambers to make installing the air mat much easier. Install the air mat
with plywood support in the boat. Make sure that the hole in the front lines up with the valve on the inflatable keel. After
installing the airmat in the boat, continue inflating the boat chambers. Once that is done, inflate the air mat floor. You
can double check its positioning as you go along by pushing down on the edges of the floor when you inflate it. When
the airmat is inflated and in the proper position, inflate the keel. The plywood support will force the keel down to
provide a deep V on the bottom of the boat. It will provide added stability in the water.
You can inflate and deflate the boat and air mat floor together and roll up as one piece. Wash and clean the sands and
dirt from the air mat floor after each use to avoid sands or dirt from getting inside and damaging the air valve. Always
inflate the keel chamber only after you have inflated all other chambers of the boat and floor. The first time when you
install the airmat floor and inflate the boat may take up to 60 minutes to complete. The given pressure of each
chamber can see the list below:
Tube air chambers – Max 3.6PSI / 25kPa, Suggested 2-3 PSI base on the temperature.
Inflatable Keel chamber – Max 5.0 PSI / 35kPa, Suggested 2-3 PSI base on the temperature.
Airmat floor chamber – Max 10 PSI / 70 kPa. Suggested 6-8 PSI base on the temperature.
If you use the boat as the tender on your sail boat or power boat, please make sure you can follow the boat user
manual and your best knowledge to take good care the boat. We suggest using a Seamax boat cover to protect the
boat against UV and Heat. We also suggest Aurora Marine boat care products.
