Seamax Inflatable Boat – English User Manual
- 19 -
an inflatable boat. Max to give 3.6 PSI)
Double check all valves and make sure they are all in good condition. You can also use the included valve wrench to
ensure all the valves are seated tightly against the floor material. To ensure that the valves are in the correct position,
push in and twist the valve stem to the up position. To confirm it, use the foot pump to pump some air in the floor and
then remove hose. If the valve stem is in the correct position the air will not escape. If it does, push down valve stem
and twist until valve stem pops up.
Locate the foot pump and familiarize yourself with the operation and installation of the air hose into the side chamber
air valves. Inflate the side chambers to about 20% of capacity. This is done to pull the floor fabric away from the side
chambers and makes the floor installation much easier.
BOAT ASSEMBLE - AIRMAT FLOOR MODEL
The air floor is designed to be light weight and easy installation. Its design allows the floor to remain in the boat and be
deflated and folded up with the rest of the boat. Seamax air mat floors are specially designed using two layers of fabric
held together by thousands of polyester cross threads. Inflating this type of fabric with high pressure air provides a
very rigid yet light weight floor. This provides the versatility of a tradition hard floor with the ease of installation. We
suggest the Seamax 12V electric air pump to work with the boat (80D or 80DB Blue Version).
AIRMAT FLOOR WITH GAS TANK PAD
PLYWOOD SUPPORT AT THE BACK
Unfold the floor on a clean flat surface free of any sharp objects that could damage the air mat. Check over to make
sure there is no defect. Lay the floor flat and ensure that all valves are snug, and the air valve is in the closed position.
Install plywood slat in holder (under the 2 strap). This is to provide the support to push the inflatable keel down and
form a deep V-shape keel under the boat.
