> Use
PAR56WH 501139 model, 3 intensities with remote controller
>
The use of the remote controller requires a positioning face to the lamp at a
maximum distance of 10 meters
, unfolded antenna. Metallic part close to the projector
or a too deep immersion (max 1 meter) may restrict the remote controller use at a very
short distance.
In this case, it is also possible to change programs using the on/off switch of the electric
supply power of the projector. A cut of the current of less than 2 seconds makes the
program change. After a cut of the current for over 10 seconds, switch on restarts from
the last program used
To control several lamps,
it is possible to use a
~
12V radio switch installed at the
output of
~
220V/12V the toroidal transformer.
For its first use, the remote controller needs to be paired with the lamp(s) installed in
the pool.
Manual program including
3 controlled intensity levels
with the provided remote controller.
Recommendations :
In all cases, refer to the
leaflet provided with the
product.
In case of difficulty during
the installation or use, it
is recommended to
watch
the installation
video
and to read the
FAQ
on our website
.
