> Use
PAR56RGB 500682 and 501405 model, 16 programs with remote controller
The use of the remote controller requires a positioning face to the lamp at a
maximum
distance of 10 meters
, unfolded antenna. Metallic part close to the projector or a too
deep immersion (max 1 meter) may restrict the remote controller use at a very short
distance.
In this case, it is also possible to change programs using the on/off switch of the electric
supply power of the projector. A cut of the current of less than 2 seconds makes the
program change. After a cut of the current for over 10 seconds, switch on restarts from
the last program used
To control several lamps,
it is possible to use a
~
12V radio switch installed at the
output of the
~
220V/12V toroidal transformer.
For its first use, the remote controller needs to be paired with the lamp(s) installed in
the pool.
Manual program including
11 static colours and 5 controlled atmospheres
with the provided remote controller.
Recommendations :
In all cases, refer to the
leaflet provided with the
product.
In case of difficulty during
the installation or use, it
is recommended to
watch
the installation
video
and to read the
FAQ
on our website
.
