(3) Batch count operation
<Boosting operation>
<Down operation>
Setting condition
Automatic reset selection and re-output selection will be invalid
OFFSET = 0, OFFSET < PRESET A,
PRESET A = 0, PRESET A < OFFSET,
PRESET B > 0
PRESET B > 0
(4) +1stage plus secondary output operation
<Boosting operation>
<Down operation>
Setting condition
Re-output selection will be invalid.
OFFSET = 0, OFFSET < PRESET A,
PRESET A = 0, OFFSET > PRESET A ,
99.9 > PRESET B > 0
99.9 > PRESET B > 0
<Output condition of each preset output>
In principle, 1 shot or continuous shot will be output from OUT1 to OUT4 under the condition of
"count display > ( < )Preset A (PresetB)
However, if +2stages preset operation or ±1stage preset operation was chosen, and used with
the condition of "with re-output" or "without automatic reset", the condition will be as below
irrespectively of the mode chosen (UP/DOWN).
Output set ON (continuous, 1 shot) :
Count display ( ) Preset A(Preset B)
Output set OFF (continuous, 1 shot*) :
Count display <(>) Preset A(Preset B)
* choosing 1shot makes output "ON"
(Display)
(Continuous)
(Display)
(Continuous)
(Continuous)
(Continuous)
(Display)
(Continuous)
(Continuous)
(Batch
Counter)
(Batch Counter) 0
<No automatic reset> <With automatic reset>
(Display)
0
P3
