11. CONTENTS OF EACH MODE AND SETTING METHOD
1. Key operations for each mode setting
Caution
1. Do not turn off the power while registering the set value
(from pressing ENT until return to measurment display)
2. Turn OFF the mode protect while undergoing mode setting.
With activating mode protect, set value cannot be changed.
For more details of mode protect function, refer to P45.
Display
Operation procedure.
Press shift key more than 2seconds while pressing
the mode key.
Display A/B will show [00] and mode [00] will be
applied.
Change the position of flashing digit.
One hit makes 1digit move right hand side.
Change the value of flashing digit.
One hit makes the value bigger by 1.
Some digit might not go up til 9 depending on the setting item.
Change the value of flashing digit.
One hit makes the value smaller by 1.
Some digit might not go up til 9 depending on the setting item.
Change the mode number. One hit chooses one
mode further. In total, there are 13 modes.
Register the set value. After finishing the
setting,register setting with this key. After
registration, measurment display will appear.
Return to measurement display without registering
the set value.
P17
